Breathe New Life into your Boat Cover

Boat Canvas Cleaner Boat Canvas Reviver Plastic Window Polish Ultra Proofer Boat Vinyl Cleaner Vinyl Ultra Proofer

Home All Products Testimonials About Us Contact Us FAQ's Privacy Policy Renovo for Cars Links

Boat Cover Canvas Cleaner - Application instructions

Please note: It is advisable to test on an inconspicuous area first, to ensure fabric is colourfast dyed.
Never use pressure washers on boat covers.

Normal Cleaning

First, dry brush the boat cover to remove any residual dirt.
Dampen surface of cover with a mist spray of water or a damp sponge.
Shake bottle well prior to removing top
Pour into suitable container
Apply with a clean 2" paint brush using even brush strokes. Start at the centre of the cover working out towards the edge.
Leave for 10-20 minutes to ensure the cleaner can work on difficult grime and stains.
Commence scrubbing using warm water and a sponge, cloth or bristle brush until the cleaner begins to lather and dirt is being removed easily. Finish by rinsing off with water. Repeat the whole process if necessary.
Subject to drying conditions allow approximately 1 hour for the boat cover to dry before applying any further Renovo products.

For heavily-soiled surfaces leave the solution to dry for approximately 30 to 40 minutes- the optimum time for active ingredients to work. Heavily -soiled surfaces should be scrubbed with a bristle brush. Finish by rinsing off with water. Repeat the whole process if necessary.

Finally leave to dry before applying Renovo’s Ultra Proofer which will not only re-establish the original 'as new' waterproof weather barrier on your canvas, also now contains UV protection and a mould/mildew growth inhibitor.

Bird Droppings / Difficult Stains
Dab or pour the Cleaner directly onto the spot of dirt or stain. (Massage into the affected area) Clean off after 30 mins. Repeat process if necessary.

Light Soiling / Quick Cleaning
For less soiled covers cleaning can commence immediately. Pour directly onto on to a cloth or sponge and massage into the affected area. Rinse off with water.

As with all cleaning products, it is best to avoid prolonged contact with skin. It is advised to use rubber gloves for protection.